Products by Hi-Tec Designs...
Updated: 12/24/2004



Our e-cart is still undergoing some minor tweaks to ensure the quality and security of your shopping experience. Check out the 'Contact' page if you would like to place an order for any of the components listed below.


Mini Light
Interior Mini Lights Although minimal in size, the high intensity, tri-color LEDs on these little beauties will light up a large area. Intended for general purpose lighting applications, these are perfect replacements for those worn out maplights, sheding some light inside your trunk, making your A/C vents glow, or lighting up that plexiglass logo on your sub box.

Even the diehard computer case modders out there can't get enough. Plug them into the +12V hard drive supply found in every CPU case, and the days of swapping LED colors for that perfect look are over. Get all of the colors you have ever wanted in one tiny package.

When power is first applied, the Mini will quickly fade up from black to white, shine a bright white for 8-10 seconds, and then begin a slow, continuous cycle through the entire rainbow of colors. By using a jumper supplied with the Mini, you can freeze the color at any time and store it in memory. The next time power is applied, the chosen color will shine down. Simply use the jumper again at any time to begin the color cycling once again.

Features:
  • User-selectable color using the InfiniColor system
  • Less than 1.3" x 0.6" in size, and 0.25" thick
  • Waterproof silicone coating
  • Wide 120 viewing angle
  • High brightness LEDs (3400+ mcd)
  • Gold plated (99.99% pure) for corrosion resistance

    Cost: $40/Mini (free Ground shipping within the lower 48 states)
    QuantityDiscount
    1-9No discount
    10+-$5/pc each addl.
    50+call



  • Maplight Mini
    Maplight Mini Want the functionality of a Mini Light that's a snap to install? Based upon the Mini Lights, the Maplight Minis come pre-configured with a socket module that allows easy plug-and-play replacement of the common maplight bulb (also known as a Festoon Lamp). Now you can get all of the same features of a Mini Light at the flip of a switch.

    When power is first applied, the Maplight Mini will quickly fade up from black to white, shine a bright white for 8-10 seconds, and then begin a slow, continuous cycle through the entire rainbow of colors. By using a jumper supplied with the Maplight Mini, you can freeze the color at any time and store it in memory. The next time power is applied, the chosen color will shine down. Simply use the jumper again at any time to begin the color cycling once again.

    Features:
  • User-selectable color using the InfiniColor system
  • Less than 1.3" x 0.6" in size, and 0.25" thick
  • Waterproof silicone coating
  • Wide 120 viewing angle
  • High brightness LEDs (3400+ mcd)
  • Gold plated (99.99% pure) for corrosion resistance

    Cost: $85/Pair (free Ground shipping within the lower 48 states)
    Quantity (pair)Discount
    1 No discount
    2-4-$10/pair each addl.
    5+-$20/pair each addl.



  • Footwell Tubes
    Footwell Tubes Tired of having an exterior that glows like the sun, and an interior as dark as a black hole? Finally, an answer to those frustrating nights of dropping something on the floor and losing it until morning. Eons beyond a simple neon light, the Footwell Tubes will make you wonder why your car didn't come with them in the first place.

    When power is first applied, the Tube will quickly fade up from black to white, shine a bright white for 8-10 seconds, and then begin a slow, continuous cycle through the entire rainbow of colors. A control wire allows you to freeze the color at any time and store it in memory. The next time power is applied, the chosen color will shine down. Simply apply power to the control wire again at any time to begin the color cycling once again.

    You have access to both active-high and active-low inputs, so it doesn't matter what make, model, or year your car is, the Footwell Tubes are going to work. Hook it up to your door pin, your maplight switch, an extra alarm output, or anything else you can think of. If power is applied to the active-high input, or the active-low input is brought to ground, the high-brightness LEDs will show you what has been hiding under your seats all of those months.

    A Fading Option wire lets you decide how the Tube reacts when it turns off. If fading is disabled, the Tube will immediately shut off when you close your door or turn off the maplights. If fading is enabled, the Tubes will remain lit for 8-10 seconds after the door has been closed or the maplights have been turned off, and then slowly fade out to black, giving you a few extra moments to find your keys.

    Features:
  • User-selectable color using the InfiniColor system
  • User-selectable fading option
  • Active-high and active-low inputs
  • Small 0.5" x 2" tube
  • Waterproof polycarbonate tube
  • Wide 120 viewing angle
  • High brightness LEDs (3400+ mcd)
  • Gold plated (99.99% pure) for corrosion resistance

    Cost: $55/Tube (free Ground shipping within the lower 48 states)
    QuantityDiscount
    1-9No discount
    10+-$10/pc each addl.
    50+call



  • Brakelight Tubes
    Brakelight Tubes Similar in style to the Footwell Tubes, Brakelight Tubes give your vehicle's rear end that extra something other lighting systems miss. If you're going to light it up, why not do it right? Get all of the typical color-selectability of our other products, but add in the safety features of brake and reverse lights. The small size of the waterproof tubes makes them ideal for lighting up your car's license plate, highlighting your motorcycle's back end and engine, or giving a unique glow to your wheel wells.

    When power is first applied, the Tube will quickly fade up from black to white, shine a bright white for 8-10 seconds, and then begin a slow, continuous cycle through the entire rainbow of colors. A control wire allows you to freeze the color at any time and store it in memory. The next time power is applied, the chosen color will shine down. Simply apply power to the control wire again at any time to begin the color cycling once again.

    Tap into your vehicle's existing brake and reverse lights and show everyone behind you that you mean business. The Tubes will turn red with every press of the brake pedal, and white when you place it into reverse. An NHTSA study has shown that LED-based brake lights increase driver reaction time by a quarter of a second, preventing many collisions... tell THAT to the officer who just pulled you over.

    Features:
  • User-selectable color using the InfiniColor system
  • User-selectable brake and reverse options
  • Small 0.5" x 2" tube
  • Waterproof polycarbonate tube
  • Wide 120 viewing angle
  • High brightness LEDs (3400+ mcd)
  • Gold plated (99.99% pure) for corrosion resistance

    Cost: $55/Tube (free Ground shipping within the lower 48 states)
    QuantityDiscount
    1-9No discount
    10+-$10/pc each addl.
    50+call



  • Sidemarker Lights
    Sidemarker Lights Tired of people not letting you change lanes because they can't see your turn signal? Add some extra visibility with the Sidemarker Lights. Get all of the typical color-selectability of our other products, but add in the safety features of a bright amber turn signal, a third brake light, and an extra reverse light. Insert these in your side mirrors and give a little glow to those around you. They'll blink amber with your turn signal, turn red with your brakes, and white with your reverse lights

    When power is first applied, the LEDs will will quickly fade up from black to white, shine a bright white for 8-10 seconds, and then begin a slow, continuous cycle through the entire rainbow of colors. A control wire allows you to freeze the color at any time and store it in memory. The next time power is applied, the chosen color will shine down. Simply apply power to the control wire again at any time to begin the color cycling once again.

    Tap into your vehicle's existing turn signal, brake, and reverse lights and show everyone around you that you mean business. The Lights will turn red with every press of the brake pedal, and white when you place it into reverse. A street-legal amber color has been pre-programmed into the unit for use with your turn signals, so the only thing you have to worry about is people paying more attention to your car than you.

    Features:
  • User-selectable color using the InfiniColor system
  • Amber color preset for turn signals
  • Small 0.6" x 1.6" board, and 0.25" thick
  • Waterproof silicone coating
  • Wide 120 viewing angle
  • High brightness LEDs (3400+ mcd)
  • Gold plated (99.99% pure) for corrosion resistance

    Cost: $55/Sidemarker (free Ground shipping within the lower 48 states)
    QuantityDiscount
    1-9No discount
    10+-$10/pc each addl.
    50+call



  • Windscreen Lights
    S2000 Windscreen 350Z Windscreen Using the same system as the Brakelight Tubes, the Windscreen Lights are a car-specific customization with an integrated feel, designed with the convertible or roadster in mind. Note:Windscreen Lights are currently listed as a custom item and may require longer than usual leadtimes. Please contact us for availabilty.

    When power is first applied, the system will quickly fade up from black to white, shine a bright white for 8-10 seconds, and then begin a slow, continuous cycle through the entire rainbow of colors. A control wire allows you to freeze the color at any time and store it in memory. The next time power is applied, the chosen color will shine down. Simply apply power to the control wire again at any time to begin the color cycling once again.

    Tap into your vehicle's existing brake and reverse lights and show everyone behind you that you mean business. The Tubes will turn red with every press of the brake pedal, and white when you place it into reverse. Due to the height of most windscreens in the cockpit, this could easily be called a third brakelight.

    Features:
  • User-selectable color using the InfiniColor system
  • User-selectable brake and reverse options
  • Small 0.5" x 1.6" board
  • Waterproof silicone coating
  • Wide 120 viewing angle
  • High brightness LEDs (3400+ mcd)
  • Gold plated (99.99% pure) for corrosion resistance

    Cost: Application-dependant (call)
    Honda S2000- and Nissan 350Z-specific install instructions are now available. Ask us about other vehicles.



  • Underbody Lights
    Underbody Kit Although slated for introduction shortly before Christmas of 2004, the original design has undergone a serious revision. While this means a longer wait for everyone, we strongly believe it will be worth it. We're happy to hear that so many have taken such a strong interest in our products, particularly this one, and it is for that reason we don't want to let you down with a piece that is only marginally better than the competition. We want to blow them away! So, please bear with us as the underbody kit undergoes this transformation.

    Cost: To be decided...



    Note: Laws governing the use of custom lighting vary from state to state. These products may not be street legal in some states, and are recommended for off-road or show-car use only. Please check with your local authorities before purchasing.

    HONDA and S2000 are registered trademarks of Honda Motor Co., Ltd. Mazda and Miata are registered trademarks of Mazda Motor Corp. BMW, Z3, and Z4 are registered trademarks of BMW AG. Nissan and 350Z Roadster are registered trademarks of Nissan Motor Co., Ltd. Hi-Tec Designs is not associated with, endorsed by, sponsored by or licensed by any of the previously mentioned companies.